Prime Tool X 8.7 – The Ultimate FRP Unlocking and Driver Installation Tool
A powerful application called PrimeTool X was created to assist users in getting past Samsung and Xiaomi devices' Factory Reset Protection (FRP) locks. It is a must-have for technicians and mobile repair specialists since it also comes with necessary drivers for MediaTek and USB Dk.
The user-friendly interface and modern GUI of this tool ensure an easy FRP lock unlocking and driver installation process.
📢 PrimeToolX 8.7 Update is Ready
This new version makes things easier. You don’t need Zadig for Qualcomm phones now. Just connect using the normal Qualcomm port. The community tab is removed, and the software is now lighter. New phone models are added. You can also remove FRP from all Samsung phones with Android 16.
Features of PrimeTool X
✅ Supports FRP removal for Samsung and Xiaomi devices [Xiaomi Redmi A3 Device support only]
✅ Works in Preloader | Brom mode
✅ Includes driver installation for MediaTek and UsbDk
✅ Simple and modern user interface
✅ One-click FRP removal
Changelog!
📢 PrimeToolX V8.7 – Update Released
📝 Changelog & New Features
🔹 1. Qualcomm Connection Update
- ✅ Zadig is no longer needed for new Qualcomm models
- ✅ Connect directly via Qualcomm HS-USB QDLoader 9008 port
🔹 2. Interface Changes
- ✅ Community tab removed
- ✅ Software is now lighter and faster
🔹 3. Device Support
- ✅ New models and binaries added
🔹 4. Samsung FRP Update
- ✅ FRP removal now supported for all Samsung devices on Android 16
🛠️ PrimeToolX by GSM Prime V8.2 – Changelog (Samsung Android 16 Support)
✅ New Device Support Added:
- Galaxy A02 (All variants)
- Galaxy A02s (A025M)
- Galaxy A03s (All)
- Galaxy A04 / A04e / A05 (All)
- Galaxy A05s:
- A057F U8 / U9
- A057G U7
- A057M UA / UB
- Galaxy A06 (All)
- Galaxy A10s / A11 / A20s (All + A207M)
- Galaxy A11:
- A115F U6
- A115M U5
- Galaxy A23:
- A235F UA
- A235M UB
🔧 New Features:
- Enable ADB: One-click method to activate ADB on supported devices.
- Remove FRP: Fast FRP bypass with patch option.
- Patch Device: Final step to complete FRP removal and stabilize ADB.
📋 Method Steps:
- Enable ADB
- Remove FRP
- Patch your device
📌 Compatibility:
- Android Version: Fully supports Android 16
- Connection Mode: Device must be powered on
- Chipset Support: All chipsets supported
🛠 PrimeToolX 8.1 – What's New
✅ No more Zadig needed for new Qualcomm models
Just connect via Qualcomm HS-USB QDLoader 9008 port — simple and direct.🌐 New “Community” tab added
Join the community ranking and see how you stack up!📱 New models and binaries supported
- Samsung Galaxy A05s A057M | UB
- Samsung Galaxy A05s A057F | U9
- Samsung Galaxy A05s A057G | U7
🛠️ Prime Tool X v7.4.2 – Free Latest Version Download (2025)
📱 Samsung Support
| Model | Variant / Bit Support |
|---|---|
| Samsung A02 | All variants – Full Bit |
| Samsung A02s | A025M – Bit 9 |
| Samsung A03s | All variants – Full Bit |
| Samsung A04 | All variants – Full Bit |
| Samsung A04e | All variants – Full Bit |
| Samsung A05 | All variants – Full Bit |
| Samsung A05s | A057F – Bit 8 |
| Samsung A05s | A057M – Bit 9 |
| Samsung A06 | All variants – Full Bit |
| Samsung A10s | All variants – Full Bit |
| Samsung A11 | A115M – Bit 5 |
| Samsung A11 | A115F – Bit 6 |
| Samsung A20s | A207F – Bit 5 |
| Samsung A20s | A207M – Bit 4 |
| Samsung A32 | All variants – Full Bit |
📱 Xiaomi Support
| Model | Android Version |
|---|---|
| Redmi A1 | Android 12 |
| Redmi A2 | Android 13 |
| Redmi A3 | Android 15 |
| Redmi 9A | Android 11 |
| Redmi 10 (2022) | Android 13 |
| Redmi 12C | Android 15 |
| Redmi Note 12S | Android 15 |
| Redmi 13C | Android 15 |
| Redmi 14C | Android 14 |
📱 Motorola Support
| Model | Android Version |
|---|---|
| Moto E22 | Android 12 |
| Moto E22i | Android 12 |
| Moto G05 | Android 15 |
| Moto G15 | Android 15 |
🆕 What’s New
- Expanded support for latest Android 15 models
- Full Bit compatibility for new Samsung variants
- Enhanced stability and detection for newer firmware structures
📌 Stay updated. Stay ahead. Prime Tool X v7.4.2 is built for 2025-ready repairs.
How to Use PrimeTool X
Step 1: Install the Required Drivers
Before using PrimeTool X for FRP removal, you need to install the required drivers.
- Open PrimeTool X and navigate to the Drivers tab.
- You will see options for Driver MediaTek and Driver UsbDk.
- Click the Instalar button next to each driver.
- Wait for the installation to complete.
Step 2: Select Your Device Brand
- Open PrimeTool X and select either Samsung or Xiaomi from the top menu.
- A list of supported models will appear on the left side.
Step 3: Choose Your Device Model
- Click on your device model from the left sidebar (e.g., Galaxy A10s or Redmi A3).
- The device details will be displayed in the main window.
Step 4: Connect Your Device in Preloader/Brom Mode
- Power off your phone.
- Press and hold the required boot key combination while connecting the phone to the PC using a USB cable.
- The tool will detect the device in Preloader | Brom mode.
Step 5: Erase FRP
- Click the Erase FRP button.
- Wait for the process to complete.
- Once done, your phone will reboot, and the FRP lock will be removed.
Step 6: Stop the Process (If Needed)
- If you need to stop the process at any point, click the Detener button.